Setting Items for Scanning Using Operation Panel
You can change the scan settings such as the scan size, resolution, or data format.
Use the button to select a setting item, then press the OK button.
Use the button to adjust each setting item, then press the OK button. The next setting item is displayed.
Note
-
The * (asterisk) on the LCD indicates the current setting.
-
The scan setting cannot be specified under the following conditions:
- When Auto scan is selected for Document type to forward the scanned data to the computer
- When you forward the scanned data to the computer using WSD (one of the network protocols supported in Windows)
-
Some setting items cannot be specified in combination with other setting items, the document type, or the destination to save the data.
-
The settings of the scan size, resolution, and data format are retained even if the printer is turned off.
-
When you forward the scanned data to the computer or attach the data to an e-mail, you can specify the destination and file name using Canon IJ Scan Utility.
-
For Windows:
-
For Mac OS:
-
-
If you scan originals from the computer, you can scan with advanced settings. For more on scanning from the computer:
-
For Windows:
-
For Mac OS:
-
-
Scan size
Select the size of the original.
Ex:
If you select Auto scan(A) -Singl, the printer detects the page size automatically and starts scanning.
If you select Auto scan(A) -Multi to save to the computer, you can scan several originals at a time.
Note
-
When Legal is selected, load the original in the ADF.
-
When 4"x6", 10x15, 5"x7", 13x18, or Auto scan(A) -Singl is selected, load the original on the platen glass.
-
Some of setting items are not available depending on the country or region of purchase.
-
-
Data format
Select the data format of the scanned data.
Ex:
-
Scan resolution
Select the resolution for scanning.
Ex: